Up until now there has been no UK dealer selling the Highway USB. Due to requests we have been in discussions with KDH and have obtained permission to be a UK reseller for the Amiga USB boards. We will be ordering the boards after the Queen's Jubilee holiday. Please order now if you want to receive one from the first batch.
compatible with USB 1.1 and USB 2.0 specification (no highspeed mode)
integrated 4 port hub
all ports are protected against overvoltage and short circuit
integrated power management on port by port base
power saving 3.3V technology
compatible with all 68030/040/060 and PPC turbo cards
compatible with Zorro II / III busses
bus interface logic can be updated without hardware modifications !
38pin expansion header for ethernet module (10MBit) or serial/parallel port expansion (hyperCOM 3i)
fast clock port
expansion header can be used simultanously with USB operations
compatible with AmigaOS 3.1, 3.5 and 3.9
USB stack is fully compatible with MorphOS
integration into Amiga OS via system conform drivers
comfortable control of USB stack by GUI (MUI)
driver for USB mouse, keyboard, parallel interface (printers) and flash card readers (SCSI emulation) are included
further drivers (webcam, digicam) also by third companies under development
1 * HIGHWAY USB controller card
2 * holding plates with two USB connectors each
1 * detailed English installation manual
1 * registration card
1 * disk with driver software
Amiga OS 3.1 or higher
Processor 68030 (25MHz) or higher
100% compatible Zorro II / III bus
power supply with 2.0 Ampere minimum on 5V (each used USB port will use a maximum of 500mA, depending on connected device)
